INNOVATIVE
HYBRID HEATING
The room is heated in two ways at the same time - by friendly infrared radiation and by releasing the accumulated heat through the front panel . Thanks to this, we feel the appropriate temperature in the central part of the room, without the effect of condensation in its upper parts.
There is no effect of overheating and discomfort so well known with classic heating.
Due to its effectiveness, the eco emitter consumes 10x less electricity than a classic 2000 WAT electric radiator.
OPERATING MANUAL AND WARRANTY CONDITIONS
eco emitter 200 covers an area of 10 -15 m²
eco emitter 100 covers an area of 5 -10 m²
SCHEMATIC DRAWINGS
We will show the operation in the drawings,
installation locations that optimally use the eco emitter
The diagram shows the use of one eco emitter and 200 in a room.
It is optimal to place it at a height of approximately 60 cm, in the axis of the room.
One eco emitter 200 will heat an area of 10-15 m²
The diagram shows the use of two eco emitters 200 .
It is optimal to place them at a height of approximately 60 cm, on opposite walls.
Moving them will make them evenly cover the entire room.
Use of two eco emitters 200 or eco emitter 100 increases steering control
and comfort of use. Eco emitter 200 can be hung horizontally or vertically.
ECOEMITTER TEST
200W
Warming up in Eco and Power mode, as well as automation and WiFi control.
eco emitter armed with Smart KIT WiFi is fully integrated with the smart home system. We can program it in terms of operating time or required temperature.
The set includes a WiFi socket with power consumption registration and a temperature and humidity factor , also working in the WiFi network.
eco emitter also works with a TRADFI socket and gateway
sold at IKEA. Here we can program the work schedule and control devices via the Internet from anywhere. It does not record power consumption and has no temperature-related control . Compatible with IKEA Smart and HomeKit.
eco emitter is designed in such a way that it can be flush with the wall surface and placed in an appropriate recess.
The back plate of the ecoemitter heats up minimally, which makes this procedure possible.
If we finish the remaining part of the wall with the same ceramics or stone from which ecoemjtters are made, only the warm and pleasant atmosphere will remind us of the existence of heating.